Display Interface; 2.12.1 Parallel Display Dvi-D Connector; Figure 8 - Panda Display Interface Block Diagram; Table 4: Hdmi Gpio Definitions - pandaboard OMAP 4 Series System Reference Manual

GPIO
GPIO_41
GPIO_60
2.12
The PandaBoard provides two possible options for the usage of the OMAP4430 parallel display signals.
The first option (the as-shipped default configuration) routes them to a TFP410 DVI transmitter, whose
output feeds an onboard DVI-D connector. The second option routes them to a pair of 20-pin LCD
expansion connectors (J1 and J4).
paragraphs. See Figure 8 for a diagram of the PandaBoard Display Interface. The path shown in red in
Figure 8 is the as-shipped default configuration.

2.12.1 Parallel Display DVI-D connector

As mentioned previously, the as-shipped parallel display interface configuration for the PandaBoard is
with the parallel display interface signals from OMAP driven to a TFP410 DVI transmitter, whose output
feeds an onboard DVI-D connector. See Figure 9 for a block diagram of this interface.
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
TM
OMAP
Reference Manual
Dir Signal Name
O HDMI_LS_OE
O HDMI_CT_CP_HPD

Table 4: HDMI GPIO Definitions

Display Interface

Both of these possible options are discussed in the following
Figure 8 – Panda Display Interface Block Diagram
4 PandaBoard System
TPD12S015 Level Shifter and internal LDO Enable
1 = Enabled, 0 = Disabled
TPD12S015 DC/DC Converter and Hot-Plug Detect
Enable 1 = Enabled, 0 = Disabled
Revision 0.4
September 22, 2010
DOC-21010
Description
(J1 & J4)
(U2) (P1)
Page 30 of 83