Weight; Installation And Service Space - Canon imagePRESS C6000 Customer Expectation Document

3.2 Weight

The weights of the main unit, feeding and finishing options (in pounds and
kilograms) are listed in the table below.
Main Unit
POD Deck-A1
Secondary POD Deck-A1
Paper Deck-AC1
Color Image Reader-H1
DADF-R1
Professional Puncher-B1
Professional Puncher
Integration Unit-A1
Primary High Capacity Stacker-C1
Secondary High Capacity Stacker-C1
Saddle Finisher-AB2
Finisher-AB1
Puncher Unit-V1
Booklet Trimmer-C1
Two-Knife Booklet Trimmer-A1
Document Insertion Unit-C1
Perfect Binder-B1
Stack Bypass-A1

3.3 Installation and Service Space

The site must provide enough space for unrestricted operation, maintenance work,
and proper ventilation. The machine dimensions are in diagrams on the next page.
Every attempt should be made to install the equipment in a room that is large
enough to allow for proper servicing and maintenance of the equipment, and
ensure that issues, such as ventilation, odors, and dust accumulation will not be a
concern.
IMPORTANT
• Keep the back of the machine at least 39 23/64" (1,000 mm) away from a wall.
• The floor must be level (with no bows) for the stabilization and support of the
machine.
• The minimum doorway opening that the machine passes through prior to
installation must be at least 36" wide.
• The minimum elevator depth used to transport the machine prior to installation
must be at least 56".
• At least 44 3/4" (1,135 mm) in width is necessary to negotiate turns prior to
installation.
Version 5
Unit
imagePRESS C6000 Customer Expectations Document
Weight
2,645 lb 1,200 kg
551 lb 250 kg
507 lb 230 kg
112 lb 51 kg
38.5 lb 17.5 kg
47.3 lb 21.5 kg
176 lb 80 kg
88 lb 40 kg
440 lb 200 kg
440 lb 200 kg
392 lb 178 kg
278 lb 126 kg
6 lb 3 kg
335 lb 152 kg
419 lb 190 kg
37.5 lb 17 kg
697 lb 316 kg
11.9 lb 5.4 kg
Page 7