Recommended Floor Space Requirements; Floor Structure Requirements - Canon imagePRESS C6000 Customer Expectation Document

3.4 Recommended Floor Space Requirements

For a fully configured imagePRESS C6000 (2-POD Decks-A1, 1-Main Unit,
2-High Capacity Stackers-C1, 1-Professional Puncher-B1 and Professional
Puncher Integration Unit-A1, Perfect Binder-B1, Saddle Finisher-AB2, Booklet
Trimmer-C1, Two-Knife Booklet Trimmer-A1, and imagePRESS Server A3100 V2
with stand), it is recommended that there be at least 43.6'' (W) x 13.2' (D) of floor
space.
39.4"
IMPORTANT
The imagePRESS C6000 was created to be modular in design. Your floor space,
budget, monthly copy/print volume, and applications will determine which
configuration will work best for you. Any configuration of up to 2-POD Decks-A1
and 2-High Capacity Stackers-C1 may be connected at once. The Saddle
Finisher-AB2 or Finisher-AB1, and Booklet Trimmer-C1 may be connected at the
same time as well. Please note that the imagePRESS C6000 will require some
type of finishing option (Saddle Finisher-AB2, Finisher-AB1, or High Capacity
Stacker-C1).

3.5 Floor Structure Requirements

The floor on which this machine is installed must have strength of at least
2
92.2 lb/ft (450 kg/m
building contractor before installing the machine.
The weight of the machine is distributed on the floor through the adjusters and
wheels. Do not install the machine on an unstable floor or platform.
Version 5
2
). If the floor does not have this level of strength, consult your
imagePRESS C6000 Customer Expectations Document
43.6' (13.3 m)
413.9"
39.4"
Page 11