1. Manuals
  2. Brands
  3. Triton Manuals
  4. Plumbing Product
  5. DENE CONCENTRIC Mini Mixer
  6. Installation and operating instructions manual

Triton DENE CONCENTRIC Mini Mixer Installation And Operating Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

DENE CONCENTRIC
Mini Mixer
REGISTER ONLINE
ENTER A PRIZE DRAW
WIN
£100
LOVE2SHOP VOUCHERS
VISIT OUR WEBSITE TODAY
TRITONSHOWERS.CO.UK/REGISTER
PRODUCT REGISTRATION IS ONLY AVAILABLE
TO UNITS PURCHASED & INSTALLED IN THE UK
FOR YOUR SERVICE REFERENCE
NOTE DOWN THE PRODUCT CODE BELOW
(FROM THE FRONT OR TOP OF THE BOX)
ALTERNATIVELY REGISTER BY TEL: 024 7637 8321
INSTALLATION AND OPERATING INSTRUCTIONS
Please read this book thoroughly and familiarise yourself with all instructions before commencing
installation and keep it for future reference.
The mixer shower installation MUST be carried out by a suitably qualified person, in the sequence
of this instruction book.
IMPORTANT SAFETY ADVICE
The shower head and hose supplied with
this product are a safety critical part of your
shower. Failure to use genuine Triton parts may
cause injury and invalidate your guarantee.
2181109H - August 2020

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DENE CONCENTRIC Mini Mixer and is the answer not in the manual?

Questions and answers

Related Manuals for Triton DENE CONCENTRIC Mini Mixer

Summary of Contents for Triton DENE CONCENTRIC Mini Mixer

  • Page 1 The shower head and hose supplied with (FROM THE FRONT OR TOP OF THE BOX) this product are a safety critical part of your shower. Failure to use genuine Triton parts may cause injury and invalidate your guarantee. ALTERNATIVELY REGISTER BY TEL: 024 7637 8321...

  • Page 2: Table Of Contents

    FAULT FINDING ................17 - 18 GUARANTEE, SERVICE POLICY, ETC......... REAR COVER nstallers please note these InstructIons are to be left wIth the user To check the product suitability for commercial and multiple installations, please contact Triton’s speci cation advisory service before installation. Telephone:...

  • Page 3: Main Components

    Concentric thermostatic mini mixer shower MAIN COMPONENTS Fig.1 Main components Ref. Description Mixer shower body Olive X2 Blanking plug Inlet nut X2 Outlet adapter Cover plate - not shown Mounting plate Wall trim X2...

  • Page 4: Dimensions

    Concentric thermostatic mini mixer shower DIMENSIONS - All dimensions regarding the product and installation are approximate. 127mm 35mm G1/2 150mm...

  • Page 5: Introduction

    Site Requirements. d. DO NOT connect the shower to a gravity hot supply and a mains cold supply or vice versa. Replacement parts can be ordered from Triton Customer Experience. See Spare Parts for details.

  • Page 6: Plumbing Requirements

    DO NOT solder fittings near the mixer shower have to be fitted. For advice on the Triton as heat can transfer along the pipework and scale inhibitor, please contact our Customer damage the shower.

  • Page 7: Typical Domestic Installations

    Concentric thermostatic mini mixer shower TYPICAL DOMESTIC INSTALLATIONS *Diagrammatic view – not to scale. *Fig.3 For illustration purposes only. Domestic Gravity Fed Systems ( fig.3) The mixer shower MUST be fed from a cold water cistern and hot water cylinder providing Stop valve nominally equal pressures.
  • Page 8 Concentric thermostatic mini mixer shower Instantaneous Gas-heated Systems, *Diagrammatic view – not to scale. *Fig.5 e.g. combination boilers ( fig.5) For illustration purposes only. The mixer shower MUST be installed with a multi-point gas water heater or combination boiler of a fully modulating design i.e. to maintain relatively stable hot water temperatures.
  • Page 9 Concentric thermostatic mini mixer shower Mains Pressurised Thermal Store Systems *Fig.7 *Diagrammatic view – not to scale. For illustration purposes only. fig.7) Packages of this type, fitted with a tempering valve (blender valve) can be used. A drop tight pressure reducing valve MUST be fitted if the Mixer supply pressures exceed 5 bar running.

  • Page 10: Installation

    Concentric thermostatic mini mixer shower INSTALLATION *Fig.8 *Diagrammatic view – not to scale. For illustration purposes only. Preparing the Mixer Valve Check the contents to make sure all parts are present. Before starting the installation, make sure all the openings on the shower are carefully covered to stop ingress of any debris etc.
  • Page 11 Concentric thermostatic mini mixer shower FITTING THE SHOWER Fig.10 Mark the position of the four locating screws for the mounting plate, although if installing to a solid brick wall using two diagonal holes will usually be enough. Drill and plug the wall. An appropriate drill bit should be used.

  • Page 12: Flow Regulation

    If, however, the temperature is above 43°C then it is likely there is contamination in the mixer shower stopping it from shutting off the hot supply. In this case refer to the maintenance section or contact Triton Customer Experience.

  • Page 13: Adjusting The Maximum Temperature Setting

    Concentric thermostatic mini mixer shower ADJUSTING THE MAXIMUM Fig.14 TEMPERATURE SETTING The mixed water temperature can be adjusted from cold through to a top limit (which can be pre-set during installation – factory set at approximately 38°C) with full anti-scald protection throughout the range.

  • Page 14: Operating The Shower

    Concentric thermostatic mini mixer shower OPERATING THE SHOWER (fig.16) Fig.16 To start the shower, turn the On/Off flow control clockwise until it hits the stop for maximum flow. To stop the shower, turn the On/Off flow control anti-clockwise until it hits the stop. Temperature control To adjust the showering temperature rotate the...

  • Page 15: Approvals & Product Flow Rates

    Inlet temperatures comply with EN1111 requirements. Outlet Temperatures 38°C. Flow Control open. Open outlet - No hose or shower head connected. To purchase a genuine Triton spare part for your product, please visit www.tritonshowers.co.uk/spares for product codes and prices. Alternatively please call our Customer Experience team on 024 7637 2222 to order direct.

  • Page 16: Maintenance

    Concentric thermostatic mini mixer shower MAINTENANCE Cleaning Triton recommends that all products are cleaned The following maintenance procedure must using warm, soapy water. be carried out for commercial and health care premises, but is not necessarily required for Do not use powerful, abrasive or aggressive domestic installations.

  • Page 17: Fault Finding

    1.4 Cold water supply 1.4.1 Turn off shower and consult a competent blocked. plumber or contact Triton Customer Expericence. 1.5 High volume of cold 1.5.1 Reduce the simultaneous demand from the water drawn off else- mains supply.
  • Page 18 Concentric thermostatic mini mixer shower FAULT FINDING Problem Cause Action 4 Water does not 4.1 Water supplies cut off. 4.1.1 Check water elsewhere in house and if flow or shower necessary contact local water company. pattern collapses 4.2 Shower unit blocked. 4.2.1 Inspect the filters.
  • Page 19 Concentric thermostatic mini mixer shower...
  • Page 20 Trade Installer Hotline: 024 7637 8344 Nuneaton www.tritonshowers.co.uk Warwickshire, CV11 4NR E-mail: serviceenquiries@tritonshowers.co.uk E-mail: technical@tritonshowers.co.uk Triton is a division of Norcros Group (Holdings) Limited Triton reserve the right to change product specifi cation without prior notice. E&OE. © TRITON SHOWERS 2020...

Table of Contents