I
NTRODUCTION
About this document
I
NTRODUCTION
This document is intended for administrators of the Xerox
Fiery
/ Xerox
EXi 570 Print Server Powered by Fiery
®
®
as the EX/i Print Server.
This document primarily describes tasks that must be completed or coordinated by the
administrator before the EX/i Print Server is ready for use. It assumes that the EX/i Print
Server has been unpacked from its shipping container and that all required cables are
connected from the EX/i Print Server to the network, a power source, and the printer, and
that the printer is operational.
If you are an administrator and plan to configure a EX/i Print Server, it is strongly
recommended that you carefully review this entire document, beginning with
installation on the network"
This document includes information about the following:
•
System Requirements
•
Setting up from the Printer Touch Panel
•
Setting up from a Client Computer
•
Setup Option Reference
•
WebTools
•
Back up and Restore Settings
•
Administration
•
Troubleshooting
®
on page 9.
EX 570 Print Server Powered by
®
, which is referred to in this document
"Stages of
7