Setting Up Printme Cloud Printing; Vdp Search Path - Xerox EX 570 Configuration And Setup

A
DMINISTRATION

Setting up PrintMe cloud printing

You must set up the EX/i Print Server through Configure to enable PrintMe cloud printing.
T P M
O SET UP RINT E CLOUD PRINTING
1 Log on to Configure (see
2 Enable PrintMe cloud printing.
• Click PrintMe.
• Select Enable PrintMe.
(optional) If you need PrintMe cloud printing to connect to the EX/i Print Server
N :
OTE
through a proxy server, configure settings for the proxy server.
– Select Proxy Settings.
– Enable Proxy and enter proxy server information.
– Save your settings.
• Click Apply.

VDP Search Path

The EX/i Print Server can search multiple locations both on network computers and on the
EX/i Print Server for VDP (Variable Data Printing) resources (for example, Postscript images
and fonts). With Configure, you can specify a location to search by setting a "file search path"
(sometimes also called a "common global search path"). Inform users of the paths that you
specify so that their jobs can access the resources.
The EX/i Print Server searches for a VDP resource in the following order:
• Path that the user specified in the job
• Paths specified in Configure
• Path that the application specifies for VPS or PPML resources when it generates the data
stream
For any of these paths, the EX/i Print Server searches the folder, and then the subfolders
within that folder.
page 31).
53