Xerox EX 570 Configuration And Setup page 44

A
DMINISTRATION
Check Now
Check Now is part of System Updates and is only available from the FACI or by logging on to
the EX/i Print Server with Remote Desktop. It is not available from Configure. Use Check
Now to view or install updates between scheduled system updates, or to view a list of
previously installed updates.
Viewing a list of installed updates
If you need to confirm what updates are installed on the EX/i Print Server, print the
Configuration page (see
T S U
O SCHEDULE YSTEM PDATES
1 Do one of the following:
• From Configure, click Server > System Update and select Enable System Updates (see
"About Configure"
• From the Fiery Advanced Controller Interface (FACI), click Start > All Programs > Fiery >
System Updates.
• Log on to the EX Print Server with Remote Desktop (see
Programs > Fiery > System Updates.
2 Specify how frequently the EX/i Print Server contacts the update server.
3 If available, select any additional options to determine how updates are handled.
4 If you use a proxy server to connect through a firewall to the Update Server, click Proxy
Settings. In the Proxy Settings dialog box, select Enable Proxy, enter the following
information, and then click Save.
• Address: proxy server IP address
• Port: port used by the proxy server
• User Name: user name for accessing the proxy server
• Password: password for accessing the proxy server
5 Do one of the following:
• From Configure, click Apply.
• From the FACI, click OK.
• If you logged on to the EX Print Server with Remote Desktop, click OK.
"Printing the Configuration page"
on page 31).
on page 42).
page 45) and click Start > All
44