B
ACK UP AND
T
B
O BACK UP FROM
1 In Configure > Server > Backup/Restore, click the Backup button.
Alternative procedures about using Backup/Restore from Command WorkStation are
available in Command WorkStation Help.
2 In the Backup dialog box, select settings and click Next.
3 Enter a file name, select a location, and click Next.
4 Click Finish.
T
B
O RESTORE FROM
1 In Configure > Server > Backup/Restore, click the Restore button.
Alternative procedures about using Backup/Restore from Command WorkStation are
available in Command WorkStation Help.
2 In the Restore dialog box, browse to the configuration file that you created earlier and click
Next.
3 Select settings and click Next.
4 Click Finish.
Fiery System Restore
The EX/i Print Server system installer allows you to back up or restore the entire system to
recover from a system crash or a hard disk failure. After reinstalling system software, you can
create a new system backup partition of the EX/i Print Server, load a system recovery partition
to restore the EX/i Print Server to an earlier state, or use utilities to troubleshoot and
administer the EX/i Print Server.
After selecting a system language, you must select one of the following options.
•
New Installation:
The EX/i Print Server is shipped with preinstalled system software. If you must reinstall
N
:
OTE
system software, contact a service technician.
•
Restore from backup or recovery partition:
default EX/i Print Server configuration. If you have not created a backup partition, this
option allows only a recovery to the default configuration and "Restore from recovery
partition" is displayed.
•
Back up hard disk drive(s):
drive or network share location.
•
Platform Utilities:
disks, or use Windows Task Manager to administer the EX/i Print Server.
R
S
ESTORE
ETTINGS
/R
ACKUP
ESTORE
/R
ACKUP
ESTORE
Install new system software.
Back up the hard disk to external media, such as a USB flash
Use the system installer for advanced procedures, such as erasing hard
Restore an earlier backup partition, or the
39