Advertisement
15) Safety Pin Installation
If you'd like to restrict height adjustment from 10' to 7' 6" you can optionally insert the
Black Safety Rod And Pin (AA) into the tube on the back of the Vertical Post (A).
If a lower height is desired remove the Safety Rod and Pin (AA) before adjusting
any lower than 7' 6".
1) Insert the Steel Safety Pin (A) into tube (C) on the back of the main
pole.
2) Insert the Locking Pin (B) through the hole in the Tube (C) and the
hole in the Steel Safety Pin (A).
3) Lock the Locking Pin (B) as shown in figure above.
16) Protective Padding Assembly
Attach gusset padding if removed during installation. Attach using the Velcro on the
back of the gusset padding to secure it to the base of the system.
Attach pole padding if removed during installation. Attach using the Velcro on the
back of the pole padding to secure it to the main pole of the system.
NOTE: It is advisable to do so to
avoid injury
22
Advertisement
