Advertisement
10) Backboard Assembly
Mount the H-Frame Backboard Mount (D) and Backboard assembly lower pivot tube
first to the Main Extension Arm (B) using one 18mm X 42cm Hex Bolt (V) and one
18mm Lock Nut (BB). Next, attach the upper H-Frame Backboard Mount (D) pivot
tube to the Parallel Linkages (C) using one 18mm X 36cm Hex Bolt (Q) and one
18mm Lock Nut (BB).
NOTE: Tighten the lock nuts
down and then back off a 1/4 turn
to allow the joint to pivot when ad-
justing the system up and down.
11) Level Backboard
Check face of backboard to see if it is level forward and back. If it is not level, correct
it by adjusting the 18mm J-Bolt Hex Nuts (L) located underneath the Vertical Post
(A) flanged base plate. (Main Pole may not be level after leveling the Backboard)
CAUTION: ATTACHING THE
BACKBOARD REQUIRES AT LEAST
FOUR CAPABLE ADULTS.
Mounting The Backboard
produnkhoops.com/video/mount_backboard.html
Level Your Backboard
produnkhoops.com/video/level.html
18
Advertisement
