Advertisement
14) Height Meter and Sticker Assembly
To apply the Rim Height Sticker (H) and Steel Rim Height Indicator (G), first use a
tape measure to crank rim up to exactly 10' from the playing surface. This is meas-
ured from the top of the rim to the playing area.
Attach the Steel Rim Height
Indicator (G) to the upper bolt
that holds the Spring-Assist
Cartridge (E) to the Main Ex-
tension Arm (B). The Steel
Rim Height Indicator (G) will
just hang on the bolt loosely.
Use a pencil to make a mark
on the Spring-Assist Cartridge
(E) where the bottom of the
Rim Height Indicator (G) stops.
Then, peel and apply sticker
(H) to outside of Spring-Assist
Cartridge (E) lining up the pen-
cil mark with the 10' mark on
the sticker. See image below
for a diagram of a completed
height indicator assembly.
NOTE: It is advisable to wait up to two weeks to allow the
anchor footing to fully cure before aggressive play.
Install Height Meter
produnkhoops.com/video/height_meter_installation.html
21
Advertisement
