CONTENTS INTRODUCTION ................3 SAFETY SPECIFICATIONS ............4 DISPLAY & BUTTON LOCATIONS..........5 MEASURING PROCEDURE............6 CLEANING..................8 BATTERY REPLACEMENT............8 SPECIFICATIONS................9 NOTES..................10 WARRANTY..................12 INTRODUCTION Simply point the non-contact IR (infra-red) thermometer at the subject’s forehead from a distance of 2” to 6”, pull the trigger and obtain immediate, highly accurate readings of human body temperature.
SAFETY SPECIFICATIONS Read the following safety information carefully before attempting to operate or service the Clinical IR Thermometer. • Only Sper Scientific technicians should perform repairs. • Protect from high heat, water, shock, dusty and extreme environments. • Use of this product is not a substitute for a doctor’s diagnosis.
MEASURING PROCEDURE 1. Hold the Clinical IR Thermometer perpendicular to the subject’s forehead from a distance of 2” to 6 “ away. 2. Press and release the trigger to read the subject’s temperature. 3. “Hi” indicates a body temperature above 108.5°C 42.5°C 3.
Page 7
VIEW HISTORICAL DATA The thermometer automatically retains the last 32 measurements. To view these: 1. Turn the thermometer on by pressing the trigger. 2. Press and release M. Next press + or – to cycle up or down through the data. The memory number will appear followed by the data.
°C & °F MODES 1. Pull the trigger to turn the thermometer on. 2. Hold the M button down and press the + button repeatedly to toggle between °C & °F modes. 3. To convert readings between °C & °F during measure ment or memory recall press and hold M and press +.
SPECIFICATIONS SPECIFICATIONS 89.0 to 110.0°F Range 35.0 to 42.0°C +/- 0.6°F Accuracy +/- 0.3°C Resolution 0 .1°C/F Measuring distance 2” to 6” (5 to 15 cm) Response Time <1 second Operating Temp . 32 to 122°F (10 to 40°C) <80% RH Storage Temp.
WARRANTY Sper Scientific warrants this product against defects in materials and workmanship for a period of 1 year from the date of purchase, and agrees to repair or replace any defective unit without charge. If your model has since been discontinued, an equivalent Sper Scientific product will be substituted if available.