Rangemaster Professional+ FXP 90 Dual Fuel User's Manual & Installation Instructions page 30

Fig. 5.10
ArtNo.302-0005 -
6BC Stopping the oven 1
Fig. 5.11
ArtNo.302-0005a -
6BC Stopping the oven 1a
Fig. 5.12
ArtNo.302-0002 - 6BC annotated
Symbol Function
[ ]
Sets the Minute Minder

[ ]
Sets the Pyrolytic duration Used with the [+] and [-] buttons

[ ]
Sets the Pyrolytic end time Used with the [+] and [-] buttons
E
[ ]
Decreases time interval
-
[ ]
Increases time interval
+
Clears the Pyrolytic
[ ] [ ]
+ -
&
duration to zero
Notes
Used with the [+] and [-] buttons
Holding this button down
allows a quick set
Holding this button down
allows a quick set
Table 5.2
NOTE: Because of the high temperatures generated
during the self-cleaning, the door will remain locked for a
period after the cleaning cycle has finished. When the oven
temperature has fallen sufficiently the interlock neon will go
out and the door will unlock.
When the door has unlocked turn the oven function control
back to OFF.
WARNING:
n
When the door has unlocked and the oven has cooled, use a
damp cloth to clean the debris and ash.
To start the self-cleaning cycle automatically
By using the clock, the self-clean cycle can be programmed to
turn on and off automatically.
NOTE: You cannot set the start time directly – this is set
automatically by setting the 'Cleaning period' and the 'stop
time' . This is the same method as used for normal automatic
cooking.
Set the oven function control to self-clean (Fig. 5.6). Press the
] button once to set the default cleaning time (Fig. 5.8).
[

To adjust the cleaning cycle duration, press the [
and press either the [–] or [+] button and set the time as
required.
Now press the [ ] button once to bring up the minimum
E
'Stop time' (Fig. 5.10) on the display. Press the [+] button
until the required 'Stop time' shows (Fig. 5.11). Release the
buttons.The symbols [AUTO] and [ P] are displayed. When
the self-clean start time is reached the [
displayed and the self-clean cycle will start automatically.
At the end of the self clean [AUTO] will flash and the clock will
return to ( 0.00 ) (Fig. 5.12). Turn the self-clean function switch
off to return to manual cooking.
To cancel the self-cleaning cycle
To cancel the self-clean function, hold down the [+] & [-]
buttons. The cycle time is re-set back to ( 0.00 ), the heating
part of the cycle will end and the cooling part of the cycle will
start. When the oven temperature has fallen sufficiently the
interlock neon will go out and the door will unlock.
When the door has unlocked turn the oven function control
back to OFF.
WARNING:
n
clean cycle by turning the oven function control
to OFF. While this will stop the heating part of the
cleaning cycle it will also stop the ventilation fans
from running and cause the oven thermal cut-out to
trip.
For an overview of the functions refer to Table 5.2.
20
The oven will still be hot!
] symbol will be

DO NOT attempt to stop the self-
] button
