TEFAL Blendforce Steel BL320AKR Manual page 7

WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK ?
Problems
Product does not work.
Excessive vibrations.
Leak from the lid.
Leak from the base of the
blender jug.
Leak from the base of the
accessories.
The blade does not turn
easily.
Impossible to lock the
blade unit with the gasket
(C1+C3) on the jug (C4).
Your blender still does not work?
Contact an approved service centre (see list in service booklet).
You can customise your blender and obtain the following accessories from
an approved service centre: Herb chopper accessory (D), Spice grinder
accessory (E), or an additional blender jug (C).
Causes
The plug is not fitted
correctly into the socket.
The jug or accessory is
not correctly positioned or
locked on the motor unit.
The product is not placed
on a flat, stable, heat-
resistant surface.
Volume of ingredients is
too high.
Volume of ingredients is
too high.
The lid is not correctly
positioned.
The blender jug seal (C2) is
not positioned correctly or
is missing.
The seal on the blade
unit (D2) or (E2) is not
positioned correctly or is
missing.
Pieces of food too large or
too hard.
The seal (C3) is not
positioned correctly.
Solutions
Plug the appliance into a
socket and switch on.
Check that the jug or
accessories are correctly
positioned and locked onto
the motor unit as shown in
the figure in the manual.
Place the product on a flat
surface.
Reduce the quantity of
ingredients processed.
Reduce the quantity of
ingredients processed.
Lock the lid correctly on the
blender jug.
Reposition the seal and lock
the blade holder correctly.
Reposition the seal on the
blade unit (C2) or (E2) and
lock it correctly onto the
bowl (F).
Reduce the size or quantity
of ingredients processed.
Add liquid.
Reposition the seal.
EN
5