Specifications - Uwatec HYDROS PRO User Manual

SPECIFICATIONS

DRY WEIGHT
Set up with Weight System Waist Strap
Set up with Travel System Waist Strap
LIFT CAPACITY
Ladies XS-S & Medium, Mens Small
Ladies Large, Mens Medium to XL-XXL
WEIGHT SYSTEM CAPACITY
Buckle Weight System
Rear Trim Weight Pockets
CYLINDER CAPACITY
Single Cylinder
OPERATING TEMPERATURE RANGE
AIR -20°C to +50°C
WATER -2°C to +40°C
18
SPECIFICATIONS
LOW PRESSURE HOSE AND PNEUMATIC INFLATION VALVE
3.9kg / 8.5lbs
LP hose and Pneumatic Inflation Valve operating pressure
2.9kg / 6.5lbs
Low Pressure Hose Fitting threads
O-Rings-Seals
160N / 35lbs
180N / 40lbs
2 X 4.5kg / 10lbs
2 X 2kg / 4.5lbs
1 X 18litre
-4° F to 122° F
+40° F to 28° F
WARNING
This product is designed to use air or nitrogen/oxygen mixtures containing up to
40% oxygen. Use of gas mixtures with increased oxygen, or the addition of
helium or other substances, may cause corrosion, deterioration, premature ag-
ing or component failure of metal and rubber parts. These actions may result in
loss of buoyancy control or air holding integrity of the BC, resulting in injury or
death. Non-standard gas mixtures may also present a risk of fire or explosion.
Use only nitrogen/oxygen mixtures containing up to 40% oxygen.
WARNING
Special instruction in cold water diving methods, and the specific use of this
product in cold water is required prior to cold water diving (temperatures below
10°C/50° F).
This instruction is beyond the scope of this manual.
95–200psi (6.5–13.8bar)
3/8–24 UNF
EPDM – Buna/Nitrile - Silicone
19