General Specifications; X-Tek Wing Bladders; Bladder - Uwatec X-Tek User Manual

Buoyancy compensator
Table of Contents

Advertisement

GENERAL SPECIFICATIONS

Shelf life:
Shelf life is seven years for a new, unused BC when deflated and stored in a sealed container or
bag at typical room temperature, with no exposure to UV.
Operating temperature range:
Air
-20°C
to
Water
-2°C
to

X-TEK WING BLADDERS

Diving with a back inflation wing BC is different from a standard BC. The X-Tek system uses either
a Horseshoe or Donut shaped bladder.

Bladder:

Each bladder is constructed of a 1680DEN Ballistic Nylon outer cover and one or more inner
bladders constucted from 420 D Nylon.
Be aware of the position of the valves when you deflate the bladder. If you want to deflate the
bladder in a head down position you have to make sure that exhaust valves are at the highest
position in relationship to the air bubble inside the bladder.
Please note, that there may be air in both sides of the Horseshoe bladder.
For normal deflation of your BC you may have to assume a head up position.
! WARNING
Wing BCs are built for a stable position under water. The X-TEK jacket is not a life jacket.
The inflated jacket doesn't guarantee an unconscious diver will be in a safe heads-up
position at the surface!
IMPORTANT!
The use of the X-Wing TEK BCs should be practiced in a controllable environment, e.g.
in a swimming pool before diving. The user must be familiar with the operation and skills
needed to safely use the system. Failure to be fully competent in the use of the jacket
may result in serious injury or death!
+50°C
-4°F
to
+40°C
28°F
to
122°F
104°F
37

Advertisement

Table of Contents
loading

Table of Contents