Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Uwatec X-BLACK
Summary of Contents for Uwatec X-BLACK
- Page 1 BCS MANUAL...
- Page 2 SUBSIDIARIES SCUBAPRO AMERICAS SCUBAPRO ASIA PACIFIC SCUBAPRO AUSTRALIA Johnson Outdoors Diving LLC 608 Block B, M.P.Industrial Unit 21 380 Eastern Valley Way 1166-A Fesler Street Centre Chatswood NSW 2067- El Cajon, CA 92020 - USA 18 Ka Yip Street, Chaiwan Australia Hong Kong SCUBAPRO FRANCE...
-
Page 3: Table Of Contents
10. BC HARNESS ADJUSTMENT - GENERAL FEATURES ........15 11. BC EXAMINATION AND PROCEDURES .............16 12. STORAGE ......................17 12.1 Inspection and Service Interval ...............17 13. GENERAL SPECIFICATIONS ................18 14. X-BLACK ........................19 15. T-ONE / T-ONE SUPERCINCH................20 16. GO ..........................21 17. MASTER JACKET ....................22 18. NAVIGATOR LITE ....................24 19. -
Page 4: Important Warnings
1. IMPORTANT WARNINGS WARNING This manual must be read and understood entirely before using the product. It is advised that you keep this manual in your possession during the entire life of your BC. FAILURE TO READ, UNDERSTAND, AND FOLLOW THE PRECAUTIONS LISTED IN THIS MANUAL COULD RESULT IN SERIOUS INJURY OR DEATH. -
Page 5: Important Cautions
WARNING THIS BC IS NOT A LIFEJACKET. Emergency face up floatation may not be provided for all wearers and in all conditions (except for Master Jacket). WARNING Ensure you have fully understood the jacket’s function and features and adjust the straps appropriately before diving. -
Page 6: General Information
SCUBAPRO refuses all responsibility for damages caused by non-compliance with the instructions contained in this manual. These instructions do not extend the warranty or the responsibilities stated by SCUBAPRO terms of sales and delivery. WARNING Always perform a pre-dive and post-dive inspection of the BC. 4. -
Page 7: Super Cinch Q.a. (Quick Ajust.): Cylinder Strap Set-Up And Attachment (Single Tank, Some Models)
WARNING LP HOSE: Maximum pressure 29bar. Do not exceed the pressure of 29 bar (420 psi). Higher pressure may cause damages or personal injuries. Super cinch Q.A. (quick ajust.): cylinder strap set-up and attachment (single tank, some models) The SCUBAPRO Super Cinch Q.A. cylinder strap allows you to easily fasten your BC to any single SCUBA cylinder. -
Page 8: Standard Cinch: Cylinder Strap Set-Up And Attachment (Single Tank, Some Models)
Standard cinch: cylinder strap set-up and attachment (single tank, some models) The SCUBAPRO ® standard cinch lets you quickly release any single tank from the BC vest. It must be installed as follows: 1. Rotate the buckle until it snaps into the open position. Slide the strap around the plastic buckle as shown in the figure (Fig. 2-4), wet the strap before clamping it in place on the tank, and adjust the length (Fig. -
Page 9: Quick Cinch (Patented)
Quick Cinch (Patented) 1. Wet the tank band before any procedure. 2. Place the backpack (S) on the tank (fig.2-8). The safety strap (L) is attached to the top side of the backpack and prevents it from sliding down while securing the buckle. Once the safety strap is adjusted, it helps to vertically position the BCD, on the same size tank, with ease. -
Page 10: Additional Tank Strap (Some Models)
Additional tank strap (some models) Some BC models feature a small tank holder backpack to achieve an easier folding and storage. These BCs include an additional stabilizing tank strap located above the main straps described in previous chapters to ensure proper cylinder mounting. In these models it is recommended to fasten the tank straps in such a way that the main strap (lower) is positioned in the lower half of... -
Page 11: Ballasting System
7. BALLASTING SYSTEM The total weight must be calculated and tested in order to maintain a neutral buoyancy since you change depth during the dive, by simply adding or releasing the correct amount of air. The SCUBAPRO BC has been designed for three ballasting systems, based on the use of the ‘Ecoweight’... -
Page 12: Back Counter Weight Pockets (Some Models: See Model Features)
Back counter Weight Pockets (some models: see model features) Top of the range SCUBAPRO BCs offer two counter weight pockets (fig. 5-CP fig. 5 WARNING Back counter weights are not designed to be released in an emergency. Failure to create adequate positive buoyancy in an emergency situation may result in injury or death. -
Page 13: Valve Set Up
8. VALVE SET UP SCUBAPRO BCs are completed by the BPI System (Balance Power Inflator). The BPI, connected to the tank/regulator, makes it possible to control buoyancy in the water (inflation/deflation of the BC) by using inflate and deflate buttons. Alternatively, users can assemble the AIR2 system. Connecting the BPI and/or AIR 2 The Power Inflation Valve allows you to inflate your BC using air from your SCUBA cylinder. -
Page 14: Deflation
Inflating the BC with the Oral Valve (on BPI and/or AIR 2) The Oral Valve is found on the end of the airway. It allows you to inflate your BC with your exhaled breath. Use of this valve for inflation is recommended on the surface, or on land prior to diving. It may be used when you cannot, or do not wish to add air to the BC with the Power Inflation Valve. 1. First exhale a small amount of air into the mouthpiece of the valve to purge any water that may be trapped there. -
Page 15: Bc Harness Adjustment - General Features
WARNING Dual Manual Dump Valve (Patent) has a safety hand button ® • The SCUBAPRO that releases air when pushed (fig 7-C), in case of failure of the Manual Dump System (broken cable, pin, etc.) or while breathing from an Air 2. •... -
Page 16: Bc Examination And Procedures
11. BC EXAMINATION AND PROCEDURES Pre-dive, dive and post-dive BC examination helps to identify equipment problems before unsafe conditions exist, preventing diving accidents. All equipment must be regularly inspected by an authorized SCUBAPRO equipment repair facility. WARNING DO NOT DIVE with a BC that does not pass any of the Pre-Dive, Dive or Post-Dive inspection points and tests. -
Page 17: Storage
Post-Dive : BC Cleaning and examination and Storage With proper care and service, your BC should provide years of enjoyment. Maintenance and care procedures must be observed and are as follows: 1. Rinse the BC thoroughly inside and out with fresh water after every use (do not use any aggressive solvent and/or cleansing liquid). -
Page 18: General Specifications
13. GENERAL SPECIFICATIONS Operating temperature range -20°C +50°C -4°F 122°F Water -2°C +40°C 28°F 104°F WARNING Special Instruction in cold water diving methods, and the specific use of this product in cold water, is required prior to cold water diving (temperatures below 10°C/50°... -
Page 19: X-Black
The dynamic shape of the pockets is highlighted by fabric pattern including classic SCUBAPRO logo on one side and the new X-Black logo on the other. Integrated weight system includes two new weight pockets on the front and rear air-net, pockets for integrated counterweights. -
Page 20: T-One / T-One Supercinch
15. T-ONE / T-ONE SUPERCINCH T-one is the Scubapro jacket specifically designed for rental. Ideal for diving school it’s based on a simple and reliable aircell. Materials and geometry are time proven to be suited for intensive use. The aircell made of EndurTex high tenacity nylon fabric, polyurethane coated and high frequency welded has been succesfully laboratory stress-tested to exceed... - Page 21 16. GO If you like to travel to your dive locations, our new SCUBAPRO GO travel BC is ready to go with you. GO is the ultimate answer to your dive travel needs: light and foldable yet complete with integrated front weight pockets. Its modern and unique style matches the spirit of adventure.
-
Page 22: Master Jacket
17. MASTER JACKET (Certified under CBRD - EN12628:1999, which means that the Master Jacket allows the diver to maintain a safe, upright position on the surface, with their head above water, even in the event they should lose consciousness). The original design of this legendary model was developed in 1978: it was the first diving Jacket ever produced and its design and technology is so successful that as of today,... - Page 23 fig. 8 fig. 13 The webbing system is conceived for the maximum safety too: infact there are adjustable shoulder belts with 50 mm. (2”) metal buckles, easy to adjust even with thick gloves, to hold tight the diver, even jumping into the water from many meters! The chest straps are elastic to prevent squeezing of the lungs, if the bag is over inflated. High visibility fabric and reflective patches complete the...
-
Page 24: Navigator Lite
18. NAVIGATOR LITE Navigator Lite is the ultralight back inflation BCD of SCUBAPRO. The air cell made of durable 420D Nylon high frequency welded features and abundant lift capacity despite its compactness. Three flat bungee straps keep the air cell streamlined under any inflation condition. The upper valves positioning, close to each other in a small area of the air cell prevents trapped air volumes and enhances the comfort. -
Page 25: Seahawk
19. SEAHAWK This is a back floatation BC which consist of a single bag WING, an independent harness and an adjustable cummerbund system. The system is equipped with two integrated weight system pockets, one on each side, and two trim pockets on the back. Our Seahawk leaves the diver’s chest and arms free, so it is ideal for any kind of underwater work and offers more freedom of movement. -
Page 26: Level
20. LEVEL Level is a front-adjustable BC summing up all the best features you can possibly need in a recreational dive. It’s lightweight, based on a bladder made out of EndurTex high tenacity nylon fabric, extremely light and robust. It’s extremely comfortable fit, with a bladder designed to gently wrap around the body under any inflation conditions. -
Page 27: Bella
21. BELLA SCUBAPRO is pleased to introduce the brand new Bella buoyancy compensator, specifically designed and meticulously tailored for female divers. It is based on the same Y shaped shoulder concept as the new Glide BC. Here the layout is specifically optimized for fitting female body, keeping pressure out of uncomfortable spots and always providing safe and reliable stability. -
Page 28: Glide
22. GLIDE Glide is the new front adjustable BC by SCUBAPRO including the best features to make it comfortable and to perfectly fit any diver needs. The new Glide is equipped with Y shaped shoulders that hold the BC tight on the diver body leaving the best freedom on arms movements. -
Page 29: Hydros Pro
23. HYDROS PRO A technological breakthrough in BC design and construction, HYDROS PRO is a Premium Plus back-inflation BC designed for Professional and serious Recreational Divers. Its ground-breaking design also makes it travel-friendly without compromising quality, durability or performance. HYDROS PRO features an exclusive Fluid- Form 3D Injection Moulded Monprene ®... - Page 30 • System Features: Using a Smart-Pack design, the HYDROS PRO is compact for easy transport and storage with its folding shoulder & waist straps that pack into the wing. The BC features various Multi-Mount accessories that can be easily mounted on specifically arranged connections. The Quick Switch System allows the diver to configure the BC from a minimalist Trav- Tek System to a Buckle Weight System, or vice versa.
-
Page 31: Hydros Core
24. HYDROS CORE Based on the ground-breaking technology of the industry-leading SCUBAPRO HYDROS family of BCs, the HYDROS CORE is the latest addition to the range. The HYDROS CORE is a Premium, minimalist-by-choice back-inflation BC designed for Professional and serious Recreational Divers who value simplicity and streamlining. Its low profile, lightweight design combined with its unique construction also... - Page 32 • System Features: With its Smart-Pack design that allows its folding shoulder straps & waist straps to stow neatly against the backplate and be wrapped under the wing, the HYDROS CORE packs up into an extremely compact bundle that is ideal for transport and storage. Max Lifting Max Lifting Sizes...
-
Page 33: Hydros X
25. HYDROS X Hydros X is the world’s first front adjustable compensator device offering a fully injection molded thermo-plastic rubber harness. This unique feature allows to tailor the harness shape perfectly fitting the diver’s torso and offering a superior comfort and stability. Every component is detachable and easily replaceable in the event of damage or for customization with colored parts. - Page 34 Manual and Declarations of Conformity on: Příručku a Prohlášení o shodě naleznete na stránkách: Vejledning og overensstemmelseserklæringer på: Benutzerhandbuch und Konformitätserklärung auf: Manual y declaraciones de conformidad en: Manuel et déclarations de conformité sur : Priručnik i izjave o sukladnosti na: Panduan dan Pernyataan Kesesuaian tentang: Manuale e Dichiarazioni di Conformità su: Kézikönyv és megfelelőségi nyilatkozatok itt: Handleiding en Conformiteitsverklaringen op: Instrukcja i deklaracja zgodności z przepisami znajduje się:...
Need help?
Do you have a question about the X-BLACK and is the answer not in the manual?
Questions and answers