Table of Contents
Advertisement
•
The neck loop output is automatically switched off when
the headphones are attached (to save battery power).
•
The volume will always start at a safe level. Use the volume
control to increase or decrease the volume (see page 20) if
needed.
5.2 Setting maximum volume
To ensure a comfortable listening level with headphones
at all times, the maximum allowable volume position can
be adjusted by activating the volume limiter.
Within 30 sec of startup:
1.
Adjust the volume to your liking.
2.
Use a pin tool to press the volume limiter button.
24
The volume can now not be increased beyond the
vertical bar in the display.
To remove the volume limit repeat step 2.
25
Advertisement
Table of Contents
