Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Phonak SDS 6.0
Summary of Contents for Phonak SDS 6.0
- Page 1 SDS 6.0 Tips and Tricks...
-
Page 2: Table Of Contents
Content Important information SDS 6.0 Fit and Go Box overview Selecting the receiver length Choosing the correct earpiece for the receiver Attaching / removing the retention to / from the receiver Attaching the dome to the receiver Attaching the SlimTip to the receiver... -
Page 3: Important Information
Previous Audéo generations (e.g. Marvel, Paradise, Lumity) are not compatible. Please note that the SDS 6.0 Sensor Receiver is only compatible with Audéo Fit devices and not covered here. Hearing instruments should not be fitted with domes/wax protection system when used by clients with perforated eardrums, inflamed ear canals or otherwise exposed middle ear cavities. -
Page 4: Sds 6.0 Fit And Go Box Overview
SDS 6.0 Fit and Go Box overview M Receiver S Receiver P Receiver 054-1190 054-1081 054-1092 054-1191 054-1082 054-1093 M Receiver S Receiver P Receiver 054-1192 054-1083 054-1094 054-1193 054-1084 054-1095 M Receiver S Receiver P Receiver 054-1194 054-1085 054-1096... - Page 5 Cap Dome 054-0788 Retention S Receiver 004-8596-001 Open Dome S 054-0785 Retention M Receiver 004-8597-001 Open Dome M 054-0786 Retention P Receiver 004-8623-001 Open Dome L 054-0787 Vented Dome S CeruStop 054-0809 098-0282 Vented Dome M 054-0810 Vented Dome L 054-0811 Power Dome S Receiver handling tool...
-
Page 6: Selecting The Receiver Length
Selecting the receiver length 1. Position your head at the same horizontal level as the client’s head so you are looking straight into the client’s ear. (a) 2. Hold the measurement tool with the appropriate blue or red colour code marking so your thumb is placed on the coloured area. -
Page 7: Choosing The Correct Earpiece For The Receiver
Choosing the correct earpiece for the receiver Dome size Perform an otoscopic examination of your client’s ear canal. Based on the examination, choose a dome size diameter and length suitable for the ear canal. The dome should fit snugly and comfortably into the opening of the client’s ear canal, shown in the figure, and help to retain the receiver inside. -
Page 8: Attaching / Removing The Retention To / From The Receiver
Attaching / removing the retention to / from the receiver We recommend using the retention for a more stable positioning of the receiver in the ear canal. It can easily be pre-shaped (to suit the concha) by sliding it over a sharp edge. Attaching the retention Hold the receiver firmly in one Slide the retention over the... - Page 9 Attaching / removing the dome to / from the receiver Attaching the dome Hold the receiver in one hand and the dome in Slide the dome over the receiver spout. You will the other hand feel the dome «click» into place. Removing the dome Pull off the dome from the receiver.
-
Page 10: Attaching The Slimtip To The Receiver
Attaching the SlimTip to the receiver Hold the SlimTip firmly with one hand, with the Slide the receiver into the sleeve of the handling tool, ensure the cable is guided into the recess of other hand insert the receiver using the handling the tool. -
Page 11: Removing The Slimtip From The Receiver
Detach the receiver from the SlimTip with a firm pull. Note: There is no tool for removing SDS 6.0 receivers from the SlimTip. Please do not insert any tool into the SlimTip opening to push the receiver out. -
Page 12: How To Exchange The Receiver
How to exchange the receiver Remove the receiver Gently pull to remove the plug from Grab the cable close to the plug. the hearing aid. Do not twist the receiver when removing. Twisting could cause damage to the wires. Attaching the receiver Make sure the plug is correctly oriented to Grab the cable close to the plug. -
Page 13: Maintenance Of Domes And Custom Ear Pieces
Maintenance of domes and custom ear pieces Domes All domes are designed as the first line of defence against wax. At the tip of each dome is a small shield that protects the sound inlet (indicated by the green arrow). Domes should be changed at least every three months or when they become stiff or brittle. -
Page 14: Exchanging The Earwax Protection
Exchanging the earwax protection CeruStop (applicable for FitnGo receivers and custom earpieces) Your hearing aid is equipped with an earwax protection to protect the speaker from earwax damage. Please check the earwax protector regularly and exchange it if it looks dirty or if the hearing aid volume or sound quality is reduced. The earwax protection should be replaced every four weeks on a regular receiver. - Page 15 HF3/HF4 (applicable for custom earpieces) Wax filter dispenser Parts Changing tool explanation a. crew end for removing used filter a. rotating disk b. new filter b. forked end for inserting new filter c. dispensing slot for used filters Removing the used wax filter Hold the earpiece firmly and secure the Insert the used wax filter into the dispensing slot rear of the speaker with your finger.
- Page 16 Since 1947, Phonak is dedicated to preserving social, emotional and physical life quality by opening new acoustic worlds. We believe that well-hearing equates to well-being and thus is essential for living life to the fullest. Today we offer the broadest portfolio of innovative hearing solutions.
Need help?
Do you have a question about the SDS 6.0 and is the answer not in the manual?
Questions and answers
What the difference (in millimetres) is between the cable lengths of the 00, 0, 1, 2 and 3 Phonak SDS 6.0 receivers?
The exact cable lengths in millimeters for the 00, 0, 1, 2, and 3 Phonak SDS 6.0 receivers are not provided in the available context.
This answer is automatically generated