Connecting To A Roger Microphone - Phonak Roger NeckLoop 02 User Manual

3.3 Connecting to a Roger microphone

1.
Turn on your Roger
microphone.
2.
Switch your hearing
aid/sound processor
to the T-coil program.
It may be necessary to contact your hearing care
professional to enable the T-coil program in your
hearing aid/sound processor.
18
3.
Hold Roger NeckLoop within 10 cm / 4 inches of your
Roger microphone.
4.
Press briefly the 'Connect' button
microphone. See the user guide for your Roger
microphone.
Successful connection is indicated in the display.
Max 10 cm /
Connecting is only required the first time you use
Roger NeckLoop. Roger NeckLoop will remain
connected with your microphone even after Roger
NeckLoop has been restarted.
on the Roger
4 inches
19