Front Panel - Safety Vision OBSERVER 4401-HVR Hardware User's Manual

3
Components

Front Panel

1
IR Remote Sensor
The IR Remote Sensor receives
signals from the HVR Remote Control.
2
Status LEDs
The Status LEDs illuminate to display
the current status of the HVR (see chart below).
3
USB Port
Insert a USB flash drive to download events
quickly without having to remove the SD card or
hard drive, or upload firmware updates.
4
SIM Card Slot
Not used.
5
Primary SD Card Slot Insert an SD card into the slot
until it clicks. To remove the SD card, briefly press it
in until it ejects.
6
Mirror/Secondary SD Card Slot
used for mirror recording or as a secondary storage
device once the primary SD card is full.
OBSERVER 4401-HVR HARDWARE USER GUIDE
This SD card can be
STATUS LEDS
REC DVR is recording video
PWR DVR is receiving power
ERR
Error may have occured
USB
USB port activity
NET HVR is connected to OMS PRO
ALM Event/alarm has occured