Inserting A Side Zipper - VERITAS Anna Instruction Manual

3
5
4
1
2
6
38

Inserting a side zipper

Place the right sides of the fabric
together. Sew a bottom seam 2cm from
the right edge of the zipper bottom
stop position. Sew a few stitches in
reverse lock. Increase the stitch length
to maximum, set the tension below 2
and baste the remaining length of the
fabric.
Fold back to the left the seam
allowance. Turn under the right the
seam allowance to form a 3mm fold.
Wrong side
1
2cm
2
5mm
3
Basting
4
Reverse stitches
5
3mm
6
Attach the right side of the presser foot
pin to the holder when sewing the left
side of the zipper.
Attach the left side of the presser foot
pin to the presser foot holder when
sewing the right side of the zipper.
Sew the zipper to the piece of fabric
with the extra 3mm, starting from the
base of the zipper. When you are
about 5cm from the end of the zipper,
stop the sewing machine with the
needle lowered (in the fabric), raise the
presser foot lever, and then open the
zipper and continue sewing.
Turn the fabric right side out, stitch
across the lower end and the right side
of the zipper.
Stop about 5cm from the top of the
zipper. Remove the basting and open
the zipper. Stitch the remaining of the
seam.