Alvarion BreezeNET B System Manual page 69

4.2.3.2.2 Save Current Configuration As Operator Defaults
The Save Current Configuration As Operator Defaults option is available only
under Administrator access rights. It enables defining the current configuration
of the unit as the Operator Defaults configuration.
4.2.3.3 Change Unit Name
The Change Unit Name option enables changing the name of the unit, which is
also the system's name in the MIB2. The name of the unit is also used as the
prompt at the bottom of each Monitor window.
Valid values: A string of up to 32 printable ASCII characters.
The default unit name is an empty string.
4.2.3.4 Change Password
The Change Password submenu enables changing the access password(s). A user
with Installer access rights can view and change the passwords for Read Only
and Installer levels. A user with Administrator access rights can view and change
the passwords for all levels.
Valid values: A string of up to 8 printable ASCII characters.
Refer to section
4.2.3.5 Flash Memory Control
The Flash Memory Control submenu enables selecting the active software version
for the unit.
The flash memory can store two software versions. One version is called Main and
the other is called Shadow. New software versions are loaded as the shadow
version. You can select the shadow version as the new active version by selecting
Reset and Boot from Shadow Version. However, after the next reset, the main
version is re-activated. To continue using the currently active version after the
next reset, select Use Running Version After Reset: The previous shadow
version will be the new main version, and vice versa.
The parameters configured in the unit are not changed as a result of loading new
software versions unless the new version includes additional parameters or
additional changes in the list of parameters. New parameters are loaded with
their default values.
Select from the following options:
Reset and Boot from Shadow Version: Activates the shadow (backup)
software version. The unit is reset automatically. Following the next reset the
unit will switch to the main version.
Operation and Administration
for a list of the default passwords for each of the access levels.
4.1
Menus and Parameters
51