Chapter 4 - Operations
4.1.2
Common Operations
The following describes the standard operations that are used when working with
the Monitor program.
Type an option number to open or activate the option. In certain cases you
may need to click Enter.
Click Esc to exit a menu or option.
NOTE
The program is automatically terminated following a determined period of inactivity. The default
time out is 5 minutes and is configured with the Log Out Timer parameter.
In some cases, to activate any configuration changes, you must reset the unit.
Certain settings are automatically activated without the need to reset the unit.
Refer to
configurable, which means that the unit need not be reset for the parameter to
take effect, and which parameters do require that the unit be reset.
40
Appendix E
for information on which parameters are run time
BreezeNET B System Manual