Alvarion BreezeNET B System Manual page 119

4.2.6.4.1.4.1 VLAN Forwarding Support
The VLAN Forwarding Support option enables or disables the VLAN Forwarding
feature.
Available selections are Disable and Enable.
The default selection is Disable.
4.2.6.4.1.4.2 Add Forwarding VLAN ID
The Add Forwarding VLAN ID option enables adding a VLAN ID to the VLAN
Forwarding List. One VLAN ID can be entered at a time. The maximum number of
VLAN IDs in the VLAN Forwarding List is 20.
Valid values are 1 to 4094.
4.2.6.4.1.4.3 Remove Forwarding VLAN ID
The Remove Forwarding VLAN ID option enables removing a VLAN ID from the
VLAN ID Forwarding List.
Valid values are VID values (from 1 to 4094) that are included in the VLAN
Forwarding List.
4.2.6.4.1.4.4 Show VLAN ID Forwarding List
The Show VLAN Forwarding List option displays the values of the VLAN IDs
included in the VLAN Forwarding List.
NOTE
If the VLAN ID Forwarding List is empty and the VLAN Forwarding Support is set to Enable, then all
data frames are discarded.
4.2.6.4.1.5 VLAN Traffic Priority
The VLAN Traffic Priority menu enables configuring the VLAN Priority field in
applicable frames. These parameters only impact the way in ehich other VLAN
aware devices in the network will handle the packet. In version 3.1 all parameters
that affect prioritization within the BreezeNET B system, including VLAN-based
prioritization, are located in the Services > Traffic Prioritization menu.
The VLAN Traffic Priority menu includes the following parameters:
VLAN Priority – Data (RB only)
VLAN Priority – Management
4.2.6.4.1.5.1 VLAN Priority - Data (RB only)
The VLAN Priority - Data is applicable for Access Links only. It enables
configuring the value of the VLAN Priority field for data frames transmitted to the
Operation and Administration
Menus and Parameters
101