Alvarion BreezeNET B System Manual page 68

Chapter 4 - Operations
Table 4-3: Parameters that are not reset after Set Partial Factory/Operator Defaults
Parameters Group
Performance Parameters
Bridge Parameters
4.2.3.2.1.3 Set Complete Operators Defaults
Select this option to reset the unit to the Operator Defaults configuration,
excluding several parameters that are listed in Table 4-2.
4.2.3.2.1.4 Set Partial Operator defaults
Select this option to reset the unit to the Operator Defaults configuration,
excluding the parameters that are required to maintain connectivity and
management access. The parameters that do not change after Set Partial
Operator Defaults are listed in Table 4-3.
4.2.3.2.1.5 Cancel Current Pending Request
Once you selected one of the Set defaults options, it will be executed after the
next reset. This option enables you to regret and cancel the pending request
before execution (provided the unit has not been reset yet).
50
Parameter
Frequency (BU)
DFS Option (BU)
Frequency Subset
RB Waiting Option (BU)
Channel Reuse Option (BU)
Radar Activity Assessment Period (BU)
Maximum Number of Detections in
Assessment Period (BU)
ATPC Option (BU)
Transmit Power
Tx Control (BU)
Best BU Support (BU)
Preferred BU MAC Address (RBU)
Adaptive Modulation Decision Thresholds
VLAN ID – Management
BreezeNET B System Manual