Installing Accessories; Rfs 122 Radio Frequency Splitter - Alvarion BreezeNET DS.11 User Manual

6. INSTALLING ACCESSORIES

This chapter introduces some of the accessories available for specific installations,
and describes how to install them. At the time of printing of this manual, the
accessories listed in this chapter are the only ones compatible with the DS.11
system.

6.1 RFS 122 Radio Frequency Splitter

The RFS 122 Radio Frequency Splitter is used to split the RF signal generated by a
transmitter into two signals. These signals are then sent to two different and
independent antennas. The RFS 122 enables radio transmission using two
directional antennas connected to the same port of the BreezeNET DS.11 unit.
Similarly, the splitter is used to combine two receiving antennas to one antenna
connector.
Before installing the RFS 122, configure the BreezeNET DS.11 unit using the
DS.11 Configuration utility to transmit through Antenna 2 only (see Section 3-14),
and connect the RFS 122 to antenna connector 2.
BreezeNET BU-DS.11/RB-DS.11
6-1
Installing Accessories
User's Guide