2.8 Installing the Indoor Unit
According to the specific conditions of the installation, route the Indoor-to-Outdoor
cable into the building so that it conveniently reaches the Indoor unit to ensure
minimal interference, leaving some spare. The cable is supplied open ended, to
allow for conveniently threading it into the building through a hole that is as small
as possible. Assemble the connector on the cable. Appendix A provides instructions
on how to assemble the connector on the Indoor-to-Outdoor cable.
1. Remove the wall mounting bracket clipped to the rear of the Indoor unit and
mount it on a wall as shown in Figure 2-6. Mount the Indoor unit on the
mounting bracket.
2. Connect the Indoor-to-Outdoor cable to the Radio connector, located on the
front panel of the Indoor unit shown in Figure 2-8. The Indoor-to-Outdoor
cable should be connected to the unit before it is connected to the mains power.
BreezeNET BU-DS.11/RB-DS.11
Figure 2-6. Wall Mounting the Indoor Unit
2-17
Installation
User's Guide