The DS.11 Configuration Utility
3.2.2 Multiple Unit Configuration
This feature allows downloading configuration parameters to multiple unit
simultaneously. When you select this option in the Options menu, all configuration
windows become write-only (with some of the parameters grayed out if not
relevant).
Note:
Select the units which you wish to upgrade from the list box on the left-hand side
of all dialog box tabs. Use Shift-click and/or Ctrl-click to select multiple units.
Enter the configuration parameter values and click
box is displayed.
This dialog box displays the selected units and displays a list of the requested
configuration changes to be made in the multiple configuration session. Check the
A log of the multiple configuration session is displayed during and after the operation.
User's Guide
The Configuration utility does not resolve the topology of the cell. Therefore,
multiple unit configuration operations should be made from the central point
where the BUs are located.
Figure 3-6. Multiple Configuration
box to reset all affected units.
3-10
BreezeNET BU-DS.11/RB-DS.11
. The following dialog