Software Download Procedure - Alvarion BreezeNET DS.11 User Manual

5. SOFTWARE DOWNLOAD PROCEDURE

1. Set the unit's IP address, using the DS.11 Configuration utility, and verify that
the PC's IP address belongs to the same Subnet Mask as the unit.
2. Ping the unit's IP address. Make sure that the Ping replies are being received.
3. Use the Firmware Upgrade procedure using the DS.11 Configuration Utility, as
described in Section 3.2.1.
Download will be completed within two minutes, and a message of successful
file transfer will be shown on the screen.
4. The unit resets itself automatically.
5. Check the diagnostics LEDs to verify that there is not hardware failure, and use
the DS.11 Configuration utility to make sure that the version number is correct.
Note:
BreezeNET BU-DS.11/RB-DS.11
Do not disconnect any cables or try to stop the process before downloading is
completed.
All configured parameters are kept during the upgrade/download procedure.
Software Download Procedure
5-1
User's Guide