Chapter 2 Installation Guide
2.1 Acquisition Check
When user opens the package of the device, it is necessary to check items according to
packing list. Normally it should include the following items:
NDS356xC SD IRD
User‟s Manual
ASI Cable
Power Cord
If any item is missing or mismatching with the list above, please contact our company.
2.2 Installation Preparation
When users install device, please follow the below steps. The details of installation will be
described at the rest part of this chapter. Users can also refer rear panel chart during the
installation.
The main content of this chapter including:
Checking the possible device missing or damage during the transportation
Preparing relevant environment for installation
Installing modulator
Connecting signal cables
Connecting communication port (if it is necessary)
2.2.1 Device's Installation Flow Chart Illustrated as following:
Acquisition
Check
2.2.2 Environment Requirement
Connecting
Grouding
Fixing
Wire and
Device
Power
Cord
NDS356xC SD IRD User‟s Manual
Connecting
Setting
Signal Wire
Parameter
1pcs
1pcs
1pcs
1pcs
Running
Device
7 / 41