FiberLabs Dexin NDS3561C User Manual page 16

Mux Program
TS Lock
Parse Program
Select Program
Process of selecting programs to
output through front panel:
[←]: to cancel program output;
[→]: to output the program
"√": a symbol
corresponding program has been
selected to output;
"X": a symbol
corresponding program has not
been selected to output
„1/7‟ represents there are all 7 programs in the list and 1 program has been selected to mux out through ASI.
 ASI:
Users can parse ASI input programs and select program(s) to mux out under this menu. The
operating method is same with what explained above.
 IP:
Press ENTER key to enter „4 IP‟, it displays as below:
IP Config:
Users can enter this menu to configure IP parameters according to the IP source to receive
the IP programs.
indicating the
indicating the
3: ASI
TS Lock
Parse Program
Select Program
4: IP
IP Config
Mux Program
NDS356xC SD IRD User‟s Manual
TS Locked
Bitrate: 4.040 Mbps
Searching Program
Get 7 Programs
Mux Program (0/7)
1: CCTV 1 X
Mux Program (0/7)
1: CCTV 1 [←]
Mux Program (0/7)
1: CCTV 1 [→]
Mux Program (1/7)
√
1: CCTV 1
For reading the input
bitrate
For reading the number
of programs from
Tuner 1 (or 2)
Press ENTER key
Press RIGHT/LEFT
key to shift arrow
Press ENTER key to
confirm
16 / 41