Input new data and click „Save‟ button at last to confirm the modification.
Parameters → PID Pass:
After finishing the configuration, click
Parameters → Decoder:
This unit supports to decode two programs to output simultaneously through the CVBS
ports. From the menu on left side of the webpage, clicking "Decoder", it displays the
interface where users can configure the Video/Audio output parameters respectively.
(Figure-12)
Figure-10
Operation Area
Figure-11
to confirm.
NDS356xC SD IRD User‟s Manual
This device supports 8
SPTS IP out. Users can
enable
the
output via SPTS here.
Click this button to
add new columns.
program
NOTE!
34 / 41