FiberLabs Dexin NDS3561C User Manual page 30

NDS356xC SD IRD User‟s Manual
Parameters → BISS:
From the menu on left side of the webpage, clicking "BISS", it displays the interface where
users can configure 2 BISS and descramble the input channels. (Figure-8)
BISS Selection Area
Figure-8
Input TS Mode：
NDS356xC has 4 signal sources: Tuner 1-2, ASI, and IP. One BISS tag can be applied to
descramble one channel input signal from the 4 signal sources. „Skip BISS‟ means not to
involve BISS function and it is used for FTA stream.
Items showing below are working as per the keys or codes set in the BISS scrambling side
(DVB-S/S2 modulators).
30 / 41