FiberLabs Dexin NDS3561C User Manual page 28

NDS356xC SD IRD User‟s Manual
Parameters → CI Card:
NDS356xC SD IRD supports 2 CI cards (Card A & Card B) to descramble programs from
either encrypted RF, ASI or IP. Users can click and enter „CI Card‟ to configure the 2 cards
respectively. (Figure-6)
Card Selection Area
Figure-6
 CI Max Bit rate
CI Max Bitrate options range from 48-108Mbps. Select a value in the pull-down list as
principle: Actual Input Bitrate≤ Max Bitrate≤CI Max decrypting capacity.
NOTE!
 Input TS Mode
NDS356xC has 4 signal sources: Tuner 1, Tuner 2, ASI, and IP. One CI card can applied to
descramble one channel input signal from the 4 signal sources. „Skip CI card‟ means to skip
the card which is used for FTA stream.
28 / 41