FiberLabs Dexin NDS3561C User Manual page 21

3.2.5 TS Config
Users can press ENTER key to enter „TS Config‟ to configure the parameters of TS output
through ASI.
TS output mode: Enter this menu to select a TS output mode.
TS Out Bit rate: Users can set TS output bit rate in this menu.
ASI Output Select: The content of TS output through ASI is copied from the one of the IP
streams (MPTS and SPTS 1-8).
TS ID: Users can set TS ID in this menu.
TS Config
TS output mode
TS output bit rate
ASI output select
TSID
ONID
TS output mode
Mux
Tuner 1
Tuner 2
ASI
IP
TS output bit rat
054 Mbps
ASI output Select
►MPTS
TS ID
00001
NDS356xC SD IRD User‟s Manual
Under this mode, users can randomly select
programs from any input channel to mux out.
To transfer programs from Tuner 1/2
out without mux
To transfer programs from ASI out
without mux
To transfer programs from IP out
without mux
21 / 41