FiberLabs Dexin NDS3561C User Manual page 26

can have an overview of the device‟s system information and working status.
User can click any item here to enter the
corresponding interface to check
information or set the parameters.
Parameters → Input 1/2 (Tuner 1/Tuner 2 Input):
From the menu on left side of the webpage, clicking "Input 1" or "Input 2", it displays the
interface where users can configure the 2 Tuner input parameters separately. (Figure-3)
Figure-2
Figure-3
NDS356xC SD IRD User‟s Manual
System
informatio
n
Input information
of the two satellite
signals, ASI and
IP stream.
Output information of the
TS and decoded program.
Configure
parameters in
area according
your signal source to
receive programs.
Click "Apply" button to
apply the input data to
start receive signals.
Language
shift area
tuner
this
to
26 / 41