FiberLabs Dexin NDS3561C User Manual page 31

Input corresponding items and data to active the BISS descrambling as principles be
Modulating Side (BISS SCR)
Mode 1+SW Data
Mode E+ESW Data + Device
Mode E+ESW Data + Input ID
After configuring the above BISS parameters, click
then click
Mode‟.
The searched out programs will be listed in the „Descramble‟ box below: (Figure 9)
Check the program(s) to be descrambled with "√" and click
descrambling the checked program(s). The program quantity to be descrambled will depend
on the CAM/CI performance you apply to.
Parameters → TS Config:
From the menu on left side of the webpage, clicking "TS Config", it displays the interface
where users can configure the ASI output parameters. (Figure-9)
Receiving Side (BISS DESCR)
Mode 1+Descrambler Key
Mode E + Descrambler Key + Burned Key
Mode E + Descrambler Key + SK
button to parse programs from the channel selected in „Input TS
Program list from the channel
selected in „Input TS Mode‟
Figure-9
Number before slash indicates the programs which have been descrambled.
Number behind slash indicates the whole programs from the selected channel.
Users can also read the program information by clicking „+‟ symbol.
NDS356xC SD IRD User‟s Manual
Digit (0x----)
12
16
14
button to apply the input data and
button to start
31 / 41