Parameters → Input 3 (ASI Input):
"Input 3" refers to the ASI source, this page is not applicable as it does not need to
configure ASI signal. (Figure-4)
Parameters → Input 4 (IP Input):
From the menu on left side of the webpage, clicking "Input 4", it displays the interface
where users can configure the IP input parameters. (Figure-5)
Figure-4
Figure-5
NDS356xC SD IRD User‟s Manual
Configure IP parameters
in this area according to
your signal source to
receive programs.
Click "Apply" button to
apply the input data to
start receive signals.
27 / 41