FiberLabs Dexin NDS3561C User Manual page 32

Output TS Mode:
Under this mode, users can randomly select programs from any input channel to mux out.
To transfer programs from Tuner 1/2 out without mux
To transfer programs from ASI out without mux
To transfer programs from IP out without mux
ASI Output Select: The TS content output through ASI is copied from the one of the IP
streams (MPTS and SPTS 1-8). Users can select one stream from the pull-down list.
After finishing the configuration, click
Parameters → Mux:
From the menu on left side of the webpage, clicking "Mux", it displays the interface where
users can configure the parameters of input signals separately. (Figure-9)
Configure TS ID and ON ID here for the output stream.
Figure-9
to confirm.
NDS356xC SD IRD User‟s Manual
32 / 41