FiberLabs Dexin NDS3561C User Manual page 15

3.2.2 Input Sets
NDS356xC supports 2 tuners input, 1 ASI input and 1 IP stream input. Users can enter
„Input Sets‟ to configure the tuner/ASI/IP parameters to receive the transport streams and
select programs to mux out. It displays as below:
 Tuner DVBS/S2:
Press ENTER key to enter „1 Tuner DVBS/S2‟ (or „2 Tuner DVBS/S2‟), it displays as
below:
Tuner Parameters:
Users can enter this menu to configure the tuner parameters separately to receive the tuner
programs.
Tuner Parameters:
Satellite frequency
LNB frequency
Symbol rate
LNB Voltage
22K
Signal Lock
Mux Program:
Users can parse the Tuner input program list and select programs to mux out in this menu.
Multiplexing operation can only take effect on condition that the "TS output
NOTE:
mode" is set to "Mux" under „TS Config‟. (i.e.: TS Config
Input Sets
1 Tuner DVBS/S2
2 Tuner DVBS/S2
3 ASI
4 IP
1 Tuner DVBS/S2
Tuner Parameters
Mux Program
18V, 13v and 0v Optional
For checking signal status and quality etc
NDS356xC SD IRD User‟s Manual
→ →
TS output mode Mux)
15 / 41