Chapter 4
Target board design for tracing with ARM
DSTREAM-ST
This chapter describes some considerations for the design of a target board that can be connected to the
DSTREAM-ST trace feature.
It contains the following sections:
•
4.1 Overview of high-speed design on page
•
4.2 PCB track impedance on page
•
4.3 Signal requirements on page
•
4.4 Modeling on page
ARM 100893_0100_00_en
4-43.
4-44.
4-45.
Copyright © 2017 ARM Limited or its affiliates. All rights reserved.
Non-Confidential
4-42.
®
4-41