Equipment And Accessories (Fig. 1); Vacuum Cleaner Preparation - eta PRETO Instructions For Use Manual

GB
– In order to ensure safety and proper function of the appliance, use only original spare
parts and accessories approved by the manufacturer.
– Never use the appliance for any other purpose than for the intended one described in
these instructions for use! This appliance is not intended for outdoor use.
– All text in other languages and pictures shown on the packaging, or the product itself,
are translated and explained at the end of this language mutation.
– The manufacturer is not responsible for damage caused by improper use of the appliance
and the accessories and its warranty for the appliance does not apply in situations when
the safety warnings above are not complied with. Failure to replace or maintain all filters
regularly according to the instructions in Chapter IV., V. and also using non-original
filters, the properties of which resulted in failure or damage of the vacuum cleaner, is also
understood to be improper use of the appliance.
For trouble-free operation of the vacuum cleaner, please use the
tested dust filters and micro-filters recommended by the producer.
II. EQUIPMENT AND ACCESSORIES (Fig. 1)
A – vacuum cleaner
A1 – suction vent
A2 – lid
A3 – lid lock
A4 – START/STOP button
A5 – power cord winding button
A6 – electric motor regulation
A7 – full filter signaling
A8 – cover (grid)
B – accessories
B1 – floor nozzle
B2 – suction hose
B3 – suction tube
B4 – upholstery nozzle
Caution: attachments it is possible to buy these accesories with marks.
III. VACUUM CLEANER PREPARATION
Hose
– Connect hose B2 to the vacuum cleaner by inserting the end piece to suction vent A1
to the maximum position (Fig. 4). You will hear a clicking sound.
– Disconnect the hose by pressing the button on the end piece and remove the hose
by pulling it slightly.
Telescopic tube
– You can connect tube B3 with hose handle B2 by slight pushing the handle to the tube (Fig. 3).
A9 – handle
A10 – power cord
A11 – parking holes
A12 – exhaust grid
A13 – exhaust HEPA micro–filter
A14 – filter (adapter) holder
A15 – dust filter (ETA ORIGINAL)
A16 – suction micro–filter
B5 – brush
B6 – crevice nozzle
B7 – TURBO nozzle (ETA 2487)
B8 – parquet brush (ETA 1,2-487)
22 / 41