VIA Technologies VAB-950 Quick Start Manual page 8

Yocto 2.6 evk

Hide thumbs Also See for VAB-950:

Table of Contents

Plug in the AC-to-DC power adapter to power on the VIA VAB-950.

Note:

Make sure the Windows 10 host machine detects the VAB-950 as ADB device.

Press and hold the SW3 button + Reset button at the same time and then release them.

If the bar on the flash_tool becomes red, it means the image installation has started.

If the color does not change, press the Reset button + SW3 button at the same time again and then release

them.

VIA VAB-950 Yocto 2.6 EVK Quick Start Guide

SW3 button diagram

Reset button diagram

Table of Contents