Remote Control Reference Guide For Av Head Unit - Alpine NVE-N872A Hardware Manual

Before Using This System
Remote control (RUE-4140)
When you use the Alpine head unit with the monitor, you can operate the AV head unit with
the remote control (supplied with NVE-N872A). Change the AUDIO/NAV. Switch, on the side
of the remote control, to AUDIO.
No. Button
1
:/J
2
VOL.
3
A.PROC.
4
SOURCE
5
MUTE
6
BAND
7
FUNC.
8
OP/CL
9
;
!
:
"
9
# 8
$
V.SEL.
Numeric Keypad
%
(1 to 6)
&
AUDIO/NAV.
(
MODE
10

Remote Control Reference Guide for AV Head Unit

2
&
3
5
7
8
"
Push : PLAY/PAUSE (IVA-D310/IVA-D300/IVA-D901/IVA-D900/CVA-1014/
CVA-1004/CVA-1003)
Push : Changes the modes as follows : Volume/Bass/Treble/Fader
(CVA-1005/CVA-1006/IVA-C800/IVA-C801)
Push hold : PLAY/PAUSE
(CVA-1005/CVA-1006/IVA-C800/IVA-C801)
Radio mode : Preset Selection (C/B), SEEK UP/DOWN (@/A)
CD/MD Player/Changer mode :
Disc Selection (C/B), Music Sensor (@/A), BW/FF (@/A Hold)
Tape Mode : Programme Sensor (C/B), REW/FF (@/A Hold)
Volume Control
Audio Processor
Source Selection
Audio Mute
Radio Band Selection
This function button has the same function as the following models : CVA-1003/
CVA-1005/CVA-1006/IVA-C800/IVA-C801.
Indash Display OPEN/CLOSE (only pressing MODE button)
Indash Display Angle LEFT (only pressing MODE button)
Indash Display Angle RIGHT (only pressing MODE button)
Indash Display Angle DOWN (only pressing MODE button)
Indash Display Angle UP (only pressing MODE button)
Switching V.SEL.
This numeric keypad has the same function of the preset buttons (1 to 6) as the
following models : CVA-1003/CVA-1005/CVA-1006/IVA-C800/IVA-C801.
Switching AUDIO/NAV. Switch to AUDIO side.
Operates 8 to # (Flashes the Status Indicator for 5 seconds.)
1
(
4
6
%
9
!
#
$
Description