Turning The System On - Alpine NVE-N872A Hardware Manual

Turning the System On

(The display examples are shown when the SMART MAP PRO NVD-A801 is used.)
With this system, when the display monitor is set in the navigation display mode or external input display
mode and the ignition key is turned to the ACC or ON positions, the opening screen will automatically appear.
1-1
When the system is used for the first
time, both the language selection
menu and IMPORTANT! are
displayed on the same screen. Select
(highlight) the desired language by
tilting the joystick. Then press the
ENTER button.
1-2 After the language is selected, im-
portant information is displayed with
each language.
2
After you have read this important
information, select "I accept" and press
the ENTER button.
The map screen is displayed.
• If user registration is incomplete, the Registration Notice
screen will appear.
3
After completing the above steps, please
refer to the SMART MAP PRO user's guide
to learn more about your navigation system
software.
a If there is no disc in the navigation system, "Please insert DVD-ROM" is displayed.
For details on how to load the disc, see "Inserting the DVD-ROM" and "Removing
the DVD-ROM" on page 11.
a If the disc cannot be read, the "Error reading DVD-ROM. Please check the disc."
message is displayed. Try reloading the disk and if the problem is not resolved,
return to an authorized Alpine dealer.
Tips
a If the monitor is kept on with the engine off for an extended period of time, the
vehicle's battery may discharge.
a NVE-N872A power is turned on or off by the ignition key is ACC or ON/OFF
position.
a Operation varies depending upon the disc version in use. For details, refer to the
manual for the SMART MAP PRO.
Operation
13