Table of Contents
Advertisement
SAFETY
Helmets and Local Laws
Always wear a helmet when riding your eBike. Ensure that the helmet
fits your head and is securely tightened down. Before riding, read
local laws and comply with all rules relating to cycling and eBiking in
your area. If you attach a seat for children to the bike, they must also
be wearing a properly fitted helmet at all times.
Pre-ride Safety Check and Inspection
Before each ride, make sure to inspect your eBike to ensure there are
no loose fasteners or accessories. Make sure to specifically check
that both the front and rear axles are secure. Also make sure both
the handlebars and the handlebar stem are not loose. Check the tire
pressure of both wheels before riding to ensure the tires are inflated
to the recommended pressure printed on the side of the tire walls.
Pull the brake levers to make sure your brakes are working properly
and adjust if necessary. Ensure both your seatpost and handlebar
stem are inserted past their minimum insertions points as indicated
by the markings on them.
Make sure that both the handlebar latch
and frame latch are fully closed and locked.
Riding in Wet Conditions
This electric bicycle can withstand light rain and small splashes,
but is not designed to be subjected to inclement weather, extremely
heavy showers, or submersion in water.
Use caution when riding in wet conditions as it
will take longer to use the brakes to slow down,
and also when turning as the tires may slip.
The electrical components on the bike are not
waterproof. The entire bike has an IP rating of 65.
Water damage is not covered under warranty.
S A F E T Y
37
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the XP 2.0 and is the answer not in the manual?
Questions and answers
When I turn the key the bike does not turn on
The Lectric XP 2.0 bike may not turn on when the key is turned due to several possible issues:
1. Battery Charge: The battery may not be sufficiently charged. Ensure the battery is fully charged until the light on the charger turns green.
2. Key Position: The key might not be in the correct position. Insert the key into the battery and turn it counterclockwise to the "ON" position or until it is parallel with the frame.
3. Display Connection: There could be a connection issue with the display. Follow the cable from the display to the quick plug, unplug it with a quick pull (without twisting), inspect both sides of the plug, and reconnect it properly.
If these steps do not resolve the issue, contacting customer support is recommended.
This answer is automatically generated
I’m having a problem with unfolding the bike. I can only open the lever to a 45 degree angle. I’ve tried machine oil and WD40. It seems that the “open” button on top doesn’t work properly. **** I doing something wrong or is this a common problem?
The context does not explicitly mention a common issue where the Lectric XP 2.0 bike's lever only opens to a 45-degree angle. However, it does mention that the folding latch should be adjusted properly so that it is not too tight, allowing it to be opened when needed. If the lever does not fully open, it may be due to over-tightening or improper adjustment of the latch.
This answer is automatically generated
Is there a reset **** for the lcd
Yes, the odometer on the Lectric XP 2.0 can be reset by holding the plus button for 5 seconds. However, there is no mention of a full LCD reset option.
This answer is automatically generated