Lectric XP 2.0 Owner's Manual page 30

Display Settings
To change display settings, hold the plus and minus button
simultaneously to enter into the advanced settings menu. In this
menu, clicking the power button will toggle between each numbered
setting. To adjust the value of each setting, click the plus and minus
buttons accordingly.
Setting
P01
P02
P04
P06
P08
P09
P10
YO U R F I R S T R I D E
Function Default
Brightness
Distance
Units
Sleep
Tire Size
Speed Limit
Throttle
Zero Start
Mode
Toggle
1
Backlight display brightness. The
darkest level is 1, the brightest
level is 3.
1
Distance Units. 0: KM; 1: MILE.
10
LCD Display sleep timer. With the
default setting, the display will turn
off after it has not been used for
10 minutes.
22
Tire size. Used by the electronics to
compute speed and distance traveled.
32
Speed limit. Range is 0-100.
The input data here represents
the maximum operating speed
of the vehicle: for example, input
25 indicates that the maximum
operating speed of the vehicle
will not exceed 25km/h; The drive
speed is maintained at this set
value. The max value allowed is
45. Anything above this will not be
recognized. Error: ± 3km/h
0 0: throttle active from standstill
1: throttle active only when
already moving
2
0: PAS Active, Throttle Inactive
1: PAS Inactive, Throttle Active
2: Both PAS and Throttle Active
Explanation
30