Table of Contents
Advertisement
To unlock the battery and remove it from the frame, follow the steps
listed above in reverse order. Be sure to remove the keys from the
battery before removing the battery from the bike. If the keys are still
in the battery, it will prevent it from being removed from the frame.
battery from the frame as it may slide out when the
bike is folded. If your battery impacts the ground
KEEPING YOUR BATTERY HEALTHY
•
If you know you won't be using the battery for more than a few
days, keep it charged at about 75% capacity. At 75%, the battery
will degrade less than at higher charge levels.
•
Periodically check your batteries charge level about once per
month and charge back up to 75% if necessary.
•
If you want to increase the number of cycles your battery will last
for, charge your battery to 100% a few hours before you plan to
ride it. For example, if you ride the bike and the charge level falls
to 50% but you plan to use the bike again in a few days, wait until
the night before you plan to use it again to charge it up to 100%.
When the battery is not in use this is healthier for the individual
cells in the long term.
B AT T E RY
Use caution when unlocking and removing your
and is damaged, discontinue use and contact
Lectric eBikes immediately.
17
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the XP 2.0 and is the answer not in the manual?
Questions and answers
When I turn the key the bike does not turn on
The Lectric XP 2.0 bike may not turn on when the key is turned due to several possible issues:
1. Battery Charge: The battery may not be sufficiently charged. Ensure the battery is fully charged until the light on the charger turns green.
2. Key Position: The key might not be in the correct position. Insert the key into the battery and turn it counterclockwise to the "ON" position or until it is parallel with the frame.
3. Display Connection: There could be a connection issue with the display. Follow the cable from the display to the quick plug, unplug it with a quick pull (without twisting), inspect both sides of the plug, and reconnect it properly.
If these steps do not resolve the issue, contacting customer support is recommended.
This answer is automatically generated
I’m having a problem with unfolding the bike. I can only open the lever to a 45 degree angle. I’ve tried machine oil and WD40. It seems that the “open” button on top doesn’t work properly. **** I doing something wrong or is this a common problem?
The context does not explicitly mention a common issue where the Lectric XP 2.0 bike's lever only opens to a 45-degree angle. However, it does mention that the folding latch should be adjusted properly so that it is not too tight, allowing it to be opened when needed. If the lever does not fully open, it may be due to over-tightening or improper adjustment of the latch.
This answer is automatically generated
Is there a reset **** for the lcd
Yes, the odometer on the Lectric XP 2.0 can be reset by holding the plus button for 5 seconds. However, there is no mention of a full LCD reset option.
This answer is automatically generated