Lectric XP 2.0 Owner's Manual page 10

Frame
1. To unfold the bike frame, grab the handlebar stem and rear end
of the bike while standing near where the battery is exposed.
Lift the bike slightly off the ground and swing the bike to its
closed position.
2. Push down on the clasp firmly until it locks into position. You
should have to use enough force such that the clasp leaves an
imprint in your palm. Pull on the clasp with your hand to confirm
that the clasp has locked and the frame cannot fold.
3. To unlock the bike frame and return it to the folded position, start
by sliding the switch labeled "open" to the right.
4. Pull the latch while still holding the switch to the "open" position.
You may now fold the bike.
Pedals
1. To fold the pedals push in slightly.
2. Continue pushing down while raising it into its folded position.
3. The pedal will click into place once in the folded position.
4. To unfold the pedals, push the pedals down until you hear an
audible click as they lock into the unfolded position.
U N B OX I N G
1
2 3 1 4
10